Product-family reference
FilmTec SW30HRLE-400 RO Membrane
Active area: 400 ft² (37 m²) · Permeate flow: 7,500 gpd (28.4 m³/day)
View details →PRODUCT DETAILS
FilmTec SW30-4040 RO Membrane in Dubai & UAE
FilmTec SW30-4040 element for seawater RO enquiries. Review the technical specifications and system fit before requesting supply or replacement.
Quotation only · Confirm the exact supplied model and configuration.
Technical specifications
| Permeate flow | 1,950 gpd (7.4 m³/day) |
|---|---|
| Stabilized salt rejection | 99.7% |
| Part number | 12082966 |
| Length × outer diameter | 1,016 × 99 mm (40 × 3.9 in) |
| Maximum feed flow | 16 gpm (3.6 m³/h) |
Manufacturer test figures apply to one element at the stated test conditions; they are not guaranteed plant output. See the source sheet for tolerances and operating limits.
Test conditions: 32,000 ppm NaCl; 800 psig (55 bar); 25 °C; 8% recovery.
Sheet revision: 45-D 01519-en Rev.10, October 2024
Application and selection
Request this exact FilmTec SW30-4040 model for seawater reverse-osmosis selection or replacement. Compare manufacturer test figures at their stated conditions, then review the proposed element against actual feed water, recovery, pretreatment and system design.
Product details
| Brand / requested model | FilmTec SW30-4040 |
|---|---|
| Application family | Seawater reverse osmosis |
| Mechanical and hydraulic fit | Confirm the pressure vessel, seals, interconnectors and system arrangement. |
| Supply scope | Element quantity, replacement work and any seals or connectors are confirmed in the quotation. |
Technical documents & downloads
AQUABEST BROCHURE · PDFProduct & service brochureProduct selection, AquaBest contacts and confirmed AMC terms.MANUFACTURER TECHNICAL DOCUMENT · PDFTechnical datasheet (PDF)Use the named model or family and the stated document revision.
Technical ratings apply to the named model or family and stated test conditions. Confirm the exact supplied configuration with AquaBest.
Request the technical datasheet for your model →Prepare your quotation
- Share the original membrane labels and the number of elements per vessel.
- Provide feed-water analysis, operating pressure, temperature, flows and recovery.
- For a performance review, include recent permeate conductivity and operating trends.
- Confirm preservation, storage, handling and commissioning with the applicable instructions.
Installation, servicing and AMC
Supply, replacement, installation and service scope are agreed in the quotation. Component, valve, housing and membrane work is included in an AMC only when specifically listed in the site contract. The domestic RO plan does not automatically cover this equipment.
Related products
Compare the product details for your application. Final compatibility and included accessories are confirmed in the quotation.
Request from AquaBest
Send the product/model, quantity, application, existing label and UAE location. Enquiries go to Sales@aquabestuae.com. Pricing is quotation only; included accessories and warranty terms follow the written offer.